Sun DDS-1 Tape Drive

Sun Part Number 370-2088

Sun Options 821, 822, 823, 6251, 6252

Light Grey Front Bezel

Sun Original Product

Front View


Rear View

Address Select Switch Cable

In the Desktop Backup Pack, orient the Flex Cable as shown, and plug it into JP6.

In the SPARCstorage UniPack, orient the Address Cable as shown, and plug it into JP6.

Power

0.63 Amps @ +5Vdc

0.38 Amps @ +12Vdc

7.7 Watts

Jumper and Switch Settings

JP4 PINS SETTING DESCRIPTION 1-2 Out Disable TERMPWR to bus 1-2 In Enable TERMPWR to bus

Jumper JP6 SCSI ID 3 2 1 0 Out Out Out 1 Out Out In 2 Out In Out 3 Out In In 4 In Out Out 5 In Out In 6 In In Out

SW1 SWITCH SETTING DESCRIPTION 1 Off Enable SCSI ID 0 = 20 2 Off Enable SCSI ID 1 = 21 3 Off Enable SCSI ID 2 = 22 4 On Enable SCSI-2 mode 5 On Enable Parity 6 Off Enable data compression 7 Off Reserved for factory use 8 On Enable power-on self test

Notes

1. The minimum operating system is Solaris 1.1.1 or Solaris 2.1.
2. Solaris 2.1 writes in high-density mode only.
3. Solaris 2.1 reads in low-density or high-density mode.
4. Solaris 2.2 reads and writes in low-density or high-density mode.
5. The Blank Tape part number is 370-1612-01.
6. The Cleaning Kit part number is 370-1613-01.
7. Firmware update tape 4.CDA-24 is part number 370-3006-01.
8. Firmware update tape 4.CDB-24 is part number 370-3269-01.

Sun original product.
All items tested by our experienced team of technicians and pulled from working systems. Item is refurbished with 90 days warranty, extended warranty options available.
Sameday and next day delivery available.