Sun 375-3088 Blade 150 System Board w/o UltraSPARC CPU

Home > System Boards > UltraSPARC >

Sun 375-3088 Blade 150 System Board w/o UltraSPARC CPU
Larger Photo Email A Friend

0 Reviews

Sun original product.

Our Price: £495.00

Availability:: Usually Ships in 24 Hours
Product Code: 375-3088

Qty:

Description

Technical Specs

Extended Information

Sun 650Mhz System Board for SB150
Sun Part Number 375-3088
Sun Original Product.

Jumper Settings

JUMPER	PINS	SETTING	DESCRIPTION
JP1	1-2 2-3	In In	Select Flash PROM (default) Select ROMBO
JP2	1-2 2-3	In In	OBP write protected (default) OBP write enabled
JP4	1-2 3-4	In Out	UltraSPARC IIi CPU (default) UltraSPARC IIi CPU (default)
JP5	1-8	Out	UltraSPARC IIi CPU
JP6 *	1-2 2-3	In In	550MHz UltraSPARC IIi CPU 650MHz UltraSPARC IIi CPU
JP9	1-4	Out	OBP Configuration
JP10	3-4 1-4	In Out	Hardware Controls CPU Fan (default) CPU Fan Always On
J49	1-8	Out	Debug header

* see below for JP3 and JP6 function in FAB 316707500001-R0B-1

FAB 316707500001-R0B-1

Pre-production PCB# 316707500001-R0B-1 has a layout similar to the Sun Blade 100.
A 6-Pin Speed Select jumper is at JP3, and a 2-Pin Registered DIMM jumper is at JP6.

JUMPER	PINS	SETTING	DESCRIPTION
JP3	1-2 3-4 5-6	In In In	550MHz UltraSPARC IIi
JP3	1-2 3-4 5-6	Out Out Out	650MHz UltraSPARC IIi
JP6	1-2 1-2	Out In	Disable Registered DIMM (default) Enable Registered DIMM

PCI Slot Device Paths

Single Function PCI Cards
PCI Slot	MHz	Device Path
3	33 MHz	/pci@1f,0/pci@5/<device>@0
2	33 MHz	/pci@1f,0/pci@5/<device>@1
1	33 MHz	/pci@1f,0/pci@5/<device>@2

Multi Function PCI Cards
PCI Slot	MHz	Device Path
3	33 MHz	/pci@1f,0/pci@5/pci@0/<device>
2	33 MHz	/pci@1f,0/pci@5/pci@1/<device>
1	33 MHz	/pci@1f,0/pci@5/pci@2/<device>

Notes

The minimum operating system is Solaris 8 2/02.
The Sun Blade 150 was announced in August 2002.

Memory Notes

The minimum memory requirement is one DIMM in U2.
The memory installation sequence is U2, U3, U4, and U5.
Each DIMM slot addresses 1GB with >=550MHz UltraSPARC IIi.

System Board Notes

System Board 375-3088 was used in the Sun Blade 150 until mid November 2003.
System Board 375-3152 was used in the Sun Blade 150 after mid November 2003.
Systems built with System Board 375-3088 and 375-3152 have the same EZ label.
M1535D Pin T10 (UPSPWR) receives power from the 3V CR2032 on 375-3088.
M1535D Pin T10 (UPSPWR) receives power from 3.3Vdd on 375-3152.
When installing the system board onto a tray, make sure the four rear panel EMI springfingers are installed above the IEEE1394 connectors, not inside the connectors.

UltraSPARC IIi Notes

The 650MHz UltraSPARC IIi is similar to the 270-440MHz UltraSPARC IIi (Sabre and Sapphire-Red).
Differences include integrated L2 Cache and SDRAM Memory Control.
The 650MHz UltraSPARC IIi is based on the 500MHz UltraSPARC IIe (Hummingbird).
The 550-650MHz UltraSPARC IIi OBP and OS name is UltraSPARC IIe.
The 550-650MHz UltraSPARC IIi is labeled UltraSPARC IIi or IIi+.
The 550MHz FRU F100-7192 includes 100-7192, 527-1023, or 527-1067.
The 550MHz FRU F527-1079 includes 100-7192, 527-1078, or 527-1079.
The 650MHz FRU F527-1077 includes 527-1023 or 527-1077.

PART #	DESCRIPTION
F100-7192 100-7192 527-1023 527-1067	550MHz UltraSPARC IIi FRU w/ Ground Ring 550MHz UltraSPARC IIi KFAB 650MHz UltraSPARC IIi KFAB 550MHz/DB650MHz UltraSPARC IIi
F527-1079 100-7192 527-1078 527-1079	550MHz UltraSPARC IIi FRU w/ Ground Ring 550MHz UltraSPARC IIi KFAB 550MHz UltraSPARC IIi DMOS4 550MHz UltraSPARC IIi DMOS4
F527-1077 527-1023 527-1077	650MHz UltraSPARC IIi FRU w/ Ground Ring 650MHz UltraSPARC IIi KFAB 650MHz UltraSPARC IIi DMOS4
F527-1023 527-1023	650MHz UltraSPARC IIi FRU w/ Ground Ring 650MHz UltraSPARC IIi KFAB