Jumper Settings

JP7 Speed Select Jumper Settings

Notes

1. The minimum Sun Fire V100 operating system is Solaris 8 2/02.
2. The hostid, MAC address, and OBP environment settings are stored on System Configuration Smart Card 370-4285.
3. The Sun Fire V100 System Board is based on the Netra X1 System Board with updated OBP, LOMLITE2, and LOM EEPROM firmware.
4. There is no Sun Fire V100 System Board FRU or UltraSPARC II FRU.

Memory Notes

1. The memory installation sequence is Slot 3, 2, 1, and 0.
2. Each DIMM slot addresses 512MB with <550MHz UltraSPARC IIe.
3. Each DIMM slot addresses 1GB with >=550MHz UltraSPARC IIi.
4. When equal size DIMMs are installed, the lowest slot number is mapped to the lowest address range.
5. When mixed size DIMMs are installed, the slot number with the largest size DIMM is mapped to the lowest address range.

UltraSPARC IIi Notes

1. The 650MHz UltraSPARC IIi is similar to the 270-440MHz UltraSPARC IIi. Differences include integrated L2 Cache and SDRAM Memory Control.
2. The 650MHz UltraSPARC IIi is based on the 500MHz UltraSPARC IIe.
3. The 550-650MHz UltraSPARC IIi OBP and OS name is UltraSPARC IIe.