Notes

1. The minimum operating system is Solaris 2.5.1 Hardware: 4/97.
2. The flash PROM is soldered to the system board.
3. Use the Flash PROM Programming Utility to update the flash PROM.

Graphics Notes

1. FFB2+ is not compatible with 300MHz Module 501-4196.
2. FFB2+ is not compatible with 300MHz Module <=501-4849-02.
3. Elite3D is not compatible with 300MHz Module 501-4196.
4. Elite3D is not compatible with 300MHz Module <=501-4849-02.

Memory Notes

1. Two DIMMs form a pair. Two pairs of DIMMs form a quad.
2. The minimum memory requirement is two DIMMs in any adjacent pair.
3. DIMMs can be installed in any order of pairs.
4. Interleaving requires a fully populated quad.
5. Each quad addresses 512MB of memory.

PCI Slot Numbering

PCI Bus B shares the address/data bus with onboard Audio, Ethernet, Flash, Floppy, Keyboard, Mouse, NVRAM, Parallel, SCSI, and Serial devices.